Mariadb Columnstore

Availability

Airbyte Cloud Airbyte OSS

Support Level

Community

Latest Version

0.1.7

Definition Id

294a4790-429b-40ae-9516-49826b9702e1

Sync overview

Output schema

Each stream will be output into its own table in MariaDB ColumnStore. Each table will contain 3 columns:

• _airbyte_ab_id: a uuid assigned by Airbyte to each event that is processed. The column type in MariaDB ColumnStore is VARCHAR(256).
• _airbyte_emitted_at: a timestamp representing when the event was pulled from the data source. The column type in MariaDB ColumnStore is TIMESTAMP.
• _airbyte_data: a json blob representing with the event data. The column type in MariaDB ColumnStore is LONGTEXT.

Features

Feature	Supported?(Yes/No)	Notes
Full Refresh Sync	Yes
Incremental Sync	Yes
Replicate Incremental Deletes	Yes
SSL connection	No
SSH Tunnel Support	Yes

Performance considerations

Could this connector hurt the user's database/API/etc... or put too much strain on it in certain circumstances? For example, if there are a lot of tables or rows in a table? What is the breaking point (e.g: 100mm> records)? What can the user do to prevent this? (e.g: use a read-only replica, or schedule frequent syncs, etc..)

Getting started

Requirements

To use the MariaDB ColumnStore destination, you'll need to sync data to MariaDB ColumnStore 5.5.3 or above.

Network Access

Make sure your MariaDB ColumnStore database can be accessed by Airbyte. If your database is within a VPC, you may need to allow access from the IP you're using to expose Airbyte.

Permissions

You need a MariaDB user with CREATE, INSERT, SELECT, DROP permissions. We highly recommend creating an Airbyte-specific user for this purpose.

Target Database

MariaDB ColumnStore doesn't differentiate between a database and schema. A database is essentially a schema where all the tables live in. You will need to choose an existing database or create a new database. This will act as a default database/schema where the tables will be created if the source doesn't provide a namespace.

Setup the MariaDB ColumnStore destination in Airbyte

Before setting up MariaDB ColumnStore destination in Airbyte, you need to set the local_infile system variable to true. You can do this by running the query SET GLOBAL local_infile = true . This is required cause Airbyte uses LOAD DATA LOCAL INFILE to load data into table.

You should now have all the requirements needed to configure MariaDB ColumnStore as a destination in the UI. You'll need the following information to configure the MariaDB ColumnStore destination:

• Host
• Port
• Username
• Password
• Database

Connection via SSH Tunnel

Airbyte has the ability to connect to a MariaDB instance via an SSH Tunnel. The reason you might want to do this because it is not possible (or against security policy) to connect to the database directly (e.g. it does not have a public IP address).

When using an SSH tunnel, you are configuring Airbyte to connect to an intermediate server (a.k.a. a bastion sever) that does have direct access to the database. Airbyte connects to the bastion and then asks the bastion to connect directly to the server.

Using this feature requires additional configuration, when creating the destination. We will talk through what each piece of configuration means.

1. Configure all fields for the destination as you normally would, except SSH Tunnel Method.
2. SSH Tunnel Method defaults to No Tunnel (meaning a direct connection). If you want to use an SSH Tunnel choose SSH Key Authentication or Password Authentication.
   1. Choose Key Authentication if you will be using an RSA private key as your secret for establishing the SSH Tunnel (see below for more information on generating this key).
   2. Choose Password Authentication if you will be using a password as your secret for establishing the SSH Tunnel.
3. SSH Tunnel Jump Server Host refers to the intermediate (bastion) server that Airbyte will connect to. This should be a hostname or an IP Address.
4. SSH Connection Port is the port on the bastion server with which to make the SSH connection. The default port for SSH connections is 22, so unless you have explicitly changed something, go with the default.
5. SSH Login Username is the username that Airbyte should use when connection to the bastion server. This is NOT the MySQl username.
6. If you are using Password Authentication, then SSH Login Username should be set to the password of the User from the previous step. If you are using SSH Key Authentication leave this blank. Again, this is not the MariaDB password, but the password for the OS-user that Airbyte is using to perform commands on the bastion.
7. If you are using SSH Key Authentication, then SSH Private Key should be set to the RSA Private Key that you are using to create the SSH connection. This should be the full contents of the key file starting with -----BEGIN RSA PRIVATE KEY----- and ending with -----END RSA PRIVATE KEY-----.

CHANGELOG

Version	Date	Pull Request	Subject
0.1.7	2022-09-07	16391	Add custom JDBC parameters field
0.1.6	2022-06-17	13864	Updated stacktrace format for any trace message errors
0.1.5	2022-05-17	12820	Improved 'check' operation performance
0.1.4	2022-02-25	10421	Refactor JDBC parameters handling
0.1.3	2022-02-14	10256	Add -XX:+ExitOnOutOfMemoryError JVM option
0.1.2	2021-12-30	#8809	Update connector fields title/description
0.1.1	2021-12-01	#8371	Fixed incorrect handling "\n" in ssh key.
0.1.0	2021-11-15	#7961	Added MariaDB ColumnStore destination.